|
|
 |
Tough, Accurate Load Cells
Plus the Best Customer Service in the Industry! |
At Rice Lake Weighing Systems, we offer the most comprehensive line of strain gauge technology available, including stainless steel construction, impressive International Protection ratings, and hermetic sealing for use in hostile environments. For your convenience, we not only offer the most extensive line of load cells, we keep them in stock. In fact, we maintain an industry-leading 95% or greater same-day order fill ratio.
|
|
|
|
B-TEK Load Cell Mounts
|
 |
Double Ended Shear Beam Double Ended Shear
Beam Load Cell Mounting Assemblies are popular in truck scales, rail scales, coil scales, and high-capacity hopper and tank scales. |
| |
|
 |
Double Ended Tank Mount Double Ended Tank Mounts
are popular for hopper and tank scales, batching/blending systems, and conveyer scales. |
| |
|
 |
Single Ended Tank Mount Single Ended Tank Mounts
are popular for lower capacity hopper and tank scales, conveyers, and batching/blending systems. |
| |
|
 |
Tank Weighing Mount Tank Weighing mount
assemblies are popular in tank and hopper scales, bins, and material handling equipment. |
| |
|
 |
Dialogik Primary Digital System The B-TEK Primary
Digital System (PDS) weighbridge conversion kit offers state of the art digital load cell technology along with a highly functional family of Dialogik™ digital weight indicators. |
Weighing Assemblies
|
 |
TMA Series Tension Mount Assembly
Fairbanks’ TMA (Tension Mount Assemblies) product line sets the standard for quality at a competitive price. It is perfect for almost any tension weighing application, regardless of the environment. |
| |
|
 |
Omnicell® 9107 Series
The 9107 Omnicell features a double-ended shear beam design suitable for precision weighing of tanks, mixers and vessels in "sanitary" conditions. It is best suited for environments where contamination must be limited and controlled. The 9107 has a UBC Zone 4 rating and is also Factory Mutual approved for all classes, groups and divisions. This assembly has an all stainless steel construction with a passivated and electropolished mirror like finish. This Omnicell 9107 comes with 25 feet of Teflon® coated load cell cable. |
| |
|
 |
Intalogix® Omnicells® Weighing Assembly Kits
A complete kit for turning your tank, bin or hopper into an accurate dependable scale with all the advantages of Fairbanks' exclusive Intalogix® Technology. Each kit contains three or four Omnicell® weighing assemblies, a NEMA 4X rated stainless steel Quad Multiplexer Board (QMB) and 27 feet of interface cable with 10 conductors. |
| |
|
 |
Analog Omnicell® Kit
A complete kit for turning your tank, bin or hopper into an accurate dependable scale. Each kit contains three or four Omnicell® weighing assemblies, a NEMA 4X rated stainless steel analog junction box and 25 feet of interface cable with six conductors. |
| |
|
 |
Omnicell® 9112 Series Tank Weighing Assembly
Tank weighing assembly; compact, low profile weighing assembly designed for superior performance in light to extreme weight ranges, as well as extreme hostile environments. |
 |
 |
PR 6211
Compact Compression Load Cell |
Product Profile
The PR 6211 range of load cells is specially designed for weighing silos, tanks and process vessels. The unique design principle facilitates a particularly compact construction and, as a result, the unit can be used even in restricted space conditions. The FlexLock installation kits counterbalance movements arising from mechanical or thermal expansion or contraction of the vessel or its supporting construction.
A particular design characteristic of some models is the thin-film or “splutter” technology. This enables an operating temperature of up to 180°C to be reached. In addition, the small construction has integrated overload protection of 500kg. At the same time, this range distinguishes itself above all for its unmatched reliability, robustness and stability, which enable trouble-free operation without adjustment, year after year. The hermetically sealed enclosure and special TPE cable allow the unit to be used even under extreme operating conditions in harsh production environments.
The entire measurement chain can be calibrated without the use of a reference weight. Due to “matched output” technology, a damaged load cell can be exchanged without the need for re-calibration. This saves a tremendous amount of time during commissioning. An explosion-proof (Ex) version of this range of load cells is also available, as an option, for use in intrinsically safe environments. |
|
|
30kg… 10t Type D1
500kg… 5t Type LT
- Easy to install in limited space
- Easy corner adjustment by matched D1 load cell outputs
- Full stainless steel construction
- Wide temperature range
- Resistant against vibration
- Hermetically sealed, IP 68 (depth of 1.5m for 10,000 hrs.), IP 69K
- Ex-version available (500kg… 10t)
- W&M approval (acc. OIML R 60)
- Integrated overload protection for up to 300kg capacity
- FM (DI)
- Limited Lifetime Warranty
Load cell construction
Hermetically sealed, welded stainless steel construction, filled with polyurethane and inert gas. |
|
PR 6011
Mounting kits for load cell PR 6211 |
- Simple and fast installation
- Proven mounting kits for vessels
- Best weighing performance since mounting kits and load cells form a complete weighing unit
- Prepared for the installation of a lift-off-protection
- Full stainless steel version available
- Completely maintenance free, incl. constrainer
- Compact design
|
|
|
|
|
Emery Winslow Load Cells
Designed with non-electronic Hydrostatic Load Cells for long term reliability even in harsh environments.
Proudly Made in the U.S.A.
- Immune to water and heavy wash downs
- Immune to lightning strikes, welding currents, surge voltages, and even RFI
- Immune to explosive conditions
- Stainless Steel 304 construction - other materials available for special conditions
- Highly Resistant to corrosion
- Capable of withstanding Shock & Vibration
- Capable of withstanding High/Low Temperatures
- Accuracy that meets or exceeds industry standards HB-44
..................................................................................................................................
 |
Lifemount Model 60-102
Indoor static (non-agitated) vessels
Gross system capacity 300 to 20,000 lbs.
|
 |
Lifemount Model 60-120
Indoor mildly agitated vessels
Gross system capacity 1,000 to 15,000 lbs.
|
 |
Lifemount Model 60-136
Indoor/outdoor, high capacity or agitated vessels
Gross system capacity 5,000 to 500,000 lbs. (Higher capacities - consult factory)
|
|
|
In this Section 
JP Bowlin offers you a 24-7 calibration certificate retrieval via our CRS system. With CRS, you can pull up the required certs, print them out, and use them at your convenience.
Load Cells 
