|
|
 |
Quck Silver
STAINLESS STEEL BENCH SCALES |
 APPLICATIONS |
- RTE Washdown
- Gross Weighing
- Gross/Tare/Net Weighing
- Manual Batching, filling or blending with totalizing
- Over/Under Checkweighing
- 3 Over/Under Modes:
(1) Sample Target & Weight Mode.
(2) Sample and manual entry of weight limits of acceptable
acceptable range.
(3) Manual entry of individual setting to establish sensitivity
parameters of the under, over and accept ranges.
|
| WHAT SETS THIS SCALE APART? |
- Type 304 Stainless Steel Construction, Nema 4X Indicator enclosure.
- Conformal coated electronic circuit boards for extra protection.
- Stainless Steel Load Cell on most models.
- Pillar Offset prevents dripping, drawing or drainage of moisture into the product contact zone. Closed corners on platform cover prevent splash collection of processing materials inside the scale.
- Bushings and spacers used to eliminate lap joints — facilitates
quick and easy cleaning and sanitizing.
- No processing material or water collection points.
- Food contact surface treated with antimicrobial coating (optional).
- All surfaces are visible and accessible for cleaning and sanitizing.
- Cleaning SOP included in the Operator Manual.
- Tilt adjust indicator.
- Highly Visible Blue Vacuum Fluorescent Display.
- Easy Access Calibration Switch.
- Most reliable bench scale available.
|
|
|
For Ready-To-Eat, Food, Chemical and Pharmaceutical applications.
| THE NEW STANDARD IN SANITARY DESIGN |
QuickSilver Bench Scales are designed to be easily cleaned and sanitized. Both the scale and its frame are completely sealed so moisture can never penetrate. All welds are continuous, which prevents processing materials and moisture from accumulating and forming colonization points for harmful bacteria like Listeria Monocytogenes, Salmonella and E. coli. Fairbanks Scales is the only scale manufacturer currently utilizing the American Meat Institute’s Sanitary Design Checklist and assistance in new product development from individual members of the AMI’s Equipment Design Task Force. The QuickSilver has been evalated and meets or exceeds the specifications for food processing as outlined in the AMI Checklist.
These strict standards ensure that the QuickSilver is safe for use in RTE areas, as well as any other production applications. |
|
 |
 |
| 4300 Checkweigh Scale |
|
|
| SPECIFICATIONS |
Display: 6 Digit, red LED, 0.56" High
Controls: ZERO, PRINT, UNITS, OVER, UNDER
Indicators: lb, kg, g, oz, OVER, ACCEPT, UNDER, NEG, ZERO, MOT
Power: 115 VAC, 50/60 Hz (230 VAC Optional); EMI/ESD protected.
Units: lb, kg, g, oz, or lb & oz
Construction: 304 Stainless Steel (Meter: 16 Gauge) (Base: 7 Gauge Maximum)
Dimensions: (Meter) 6" h x 10" w x 3" d (Base) 10" x 10" x 2" h; 12" x 12" x 3" h; 15" x 15" x 3" h
NTEP: (Meter) CC #97-038A1 10,000d Class III (Base) CC #97-097A1 5000d Class III
Options: 230 VAC operation and RS-232 cables
Warranty: Two Years Parts & Labor
|
 |
| |
|
|
 |
| IQ plus 2100 Digital Bench Scale |
| Standard Features |
- NEMA 4X, 304 stainless steel
- Large, bold 0.8" Light Emitting Diode (LED) Display
- Status annunciators: lb, kg, oz, g, negative, motion, center of zero
- One full duplex RS-232 port
- Two digital inputs for remote zero, print, and units
- 12" column, attachment bracket, or tilt stand for table, wall or under counter mounting
- 115 VAC operation, 230 VAC available
- RL1042 aluminum, single point load cell
- Overload and upload stops on scale base
- Stainless steel, tactile feel, piezo zero and units buttons
- Displays units in decimal lb, kg, oz, lb & oz, and grams
|
| |
 |
|
|
| Specifications |
LINE VOLTAGES: 115 or 230 VAC FREQUENCY: 50 or 60 Hz
POWER CONSUMPTION: 70 mA @ 115 VAC (8W) 35 mA @ 230 VAC (8W)
DISPLAY RESOLUTION: 10,000 dd
DIGITAL INPUTS: Two inputs, TTL or switch closure, active-low
DIGITAL FILTER: Software selectable
SERIAL COMMUNICATIONS:
Full duplex RS-232; 9600, 4800, 2400, 1200 bps; 7 or 8 data bits; even, odd, or no parity
DISPLAY:
6-digit Light Emitting Diode (LED) display. 7-segment, 0.8"
(20 mm) digits
LED ANNUNCIATORS:
Negative value, center of zero, motion, kg, g, lb, oz
KEYPAD:
Two stainless steel piezo switches
OPERATING TEMPERATURE:
14°F to 104°F (-10°C to 40°C)
RATING/MATERIAL: NEMA 4X/IP66, stainless steel
APPROVALS:
Indicator: NTEP certified per H-44, Class IIIL 10,000d; CC# 00-045 Measurement Canada approved, AM-5374; UL & C-UL listed Base: NTEP - certified per H-44, Class III 5,000d; CC# 95-072A2
WARRANTY: 2-year limited warranty |
|
|
 |
|
JP Bowlin offers you a 24-7 calibration certificate retrieval via our CRS system. With CRS, you can pull up the required certs, print them out, and use them at your convenience.
Static Check Weighing